Home > For Sale > 350 Chevy Engine

350 Chevy Engine


In 1973 power decreased to 190hp, but increased slightly in 1974 to 195hp.[8] LT-1[edit] For the Generation II V8 used from 1991-1997, see LT1 For the new Generation V V8, see Over the years, every American General Motors division except Saturn used it and its descendants in their vehicles.[1] Finally superseded by GM's Generation II "LT" and Generation III "LS" V8s in These were intended to fill the gap where the venerable 283 ('57-'67), & 307 ('68-'73) had been. L05[edit] The L05 was introduced in 1987 for use in Chevrolet/GMC trucks in both the GMT400 (introduced in April 1987 as 1988 models) and the R/V series trucks such as the this contact form

Power was down in 1971 to dual-rated 330hp (250kW) (gross)/255hp (net) and 360lb·ft (488N·m) of torque with 9:1 compression, and again in 1972 (the last year of the LT-1, now rated Learn More PERFORMER DUAL-QUAD (315 HP) This Performer Dual-Quad has the same specs as the Performer 320 with the addition of an Edelbrock dual four barrel intake & 500 cfm The 2002 model year was the final year for the L31 5.7L small block V8 whose origins date back to 1955. of torque and performed on 91-octane pump gas. http://www.ebay.com/bhp/350-chevy-engine

Chevy 350 Engine For Sale

L48[edit] Years: 1967–1980 The L48 is the original 350cuin, solely available for 1967 in the Super Sport (SS) version of Camaro (1967-up) or Chevy II/Nova in 1968-1979. LG4[edit] Years: 1980–1988* The LG4 produced 150hp (112kW)-170hp (127kW) and 240lb·ft (325N·m)-250lb·ft (339N·m). Learn More SIGNATURE SERIES 383 (460 HP) This Signature Series 383 is truly a unique crate engine, designed for those with an appreciation for Edelbrock performance and collectability. In spite of its novel green sand foundry construction, the '55 block's lack of adequate oil filtration leaves it typically only desirable to period collectors.[citation needed] The 1956 Corvette introduced three

Five different versions between 185hp (138kW) and 283cuin were available, depending on whether a single carb, twin carbs, or fuel injection was used. Like the LT1, it features sequential fuel injection, reverse-flow cooling, and an optical ignition pickup. Please help improve this article by adding citations to reliable sources. 350 Chevy Engine For Sale On Craigslist Like all of our crate engines, the 350/290 Deluxe starts with a brand-new block.

The 267.8cuin (4,389cc) engine had the 350's crankshaft stroke of 3.48" and the smallest bore of any small-block, 3.500 in (88.9x88.4mm), shared with the 200 V6 introduced a year earlier. Chevy 350 Engine Specs We started in second, and even then there was so much torque, you’d get wheelspin through third and fourth gears.” Prepared with a Lucas-McKay mechanically timed individual-stack magnesium fuel-injection induction system This engine used the TBI throttle-body fuel injection. https://en.wikipedia.org/wiki/Chevrolet_small-block_engine At a base horsepower of 195, the engine can produce up to 260 HP and 350 ft/lbs torque with a 4-bbl carburetor and headers.

Performer Classic 320 engines also include a round Classic series air cleaner available in polished or black powder coated finish. Chevy 5.7 Vortec Engine For Sale The 400 is the only engine that uses a 2.65" main bearing journal and a 2.10" rod bearing journal. L82[edit] Years: 1973–1980 The 1973–1974 L82 was a "performance" version of the 350 that still used the casting number 624 76cc chamber "2.02" heads but with a Rochester Quadra-jet 4bbl carburetor All years had an 8.5:1 compression ratio.

Chevy 350 Engine Specs

The engine was originally planned for the long-awaited '82 Camaro Z28, however due to a last-minute GM-mandated cancellation of Pontiac's 301 V8 production & Turbo 4.9L Project (T301), the Crossfire 305 For instance, the 1975 version only reaches 165 horsepower. Chevy 350 Engine For Sale ZQ3[edit] Years: 1970-1974 The ZQ3 was the standard engine in the 1970–1974 Chevrolet Corvette. Chevy 350 Crate Engine For Sale Generated Thu, 17 Nov 2016 15:57:05 GMT by s_mf18 (squid/3.5.20)

The engine is covered by a GM warranty for three years or 100,000 miles in applicable GM vehicles only. Output is 200hp (150kW) and 245lb·ft (332N·m). Chevrolet Performance 19244450 - Chevrolet Performance 350/290 Deluxe Crate Engines Compare Engine Assembly, Crate Engine, 350/290 Deluxe, 300 HP, Each (2) Part Number: NAL-19244450 More Detail... In 1983, Chevrolet replaced the cast iron intake with an aluminum version and utilized either 14014416 ("416") or 14022601("601") heads with int: 1.84/ exh: 1.50 valves, 58cc chambers, 178cc runners. Used 350 Motor For Sale

LU5[edit] Years: 1982 – late-1983 The LU5 "Crossfire EFI 5.0L" featured a dual Throttle Body Injection set-up, based upon the original "Crossram Intake" supplied by Chevrolet for the 1969 Camaro Z28. Chevrolet Performance 19210007 - Chevrolet Performance 350 HO Base Crate Engines Compare Engine Assembly, Crate Engine, Chevy 350 HO, Base, Each (5) Part Number: NAL-19210007 More Detail... Vehicles Cars Commercial Use Crossovers Diesel Hybrid Electric Cars Performance Small Cars SUVs Trucks Vans Shopping Tools Build & Price Certified Pre-Owned Dealer Locator Search Inventory Shop Click Drive Offers & It was down to 205 bhp and 255 lb-ft of torque for 1975.

The 92–93 LT1s used speed density fuel management, batch-fire fuel injection and a dedicated Engine Control Module (ECM). 5.7 Liter Chevy Engine For Sale Truck freight fees also waived on this item. Many of the 302s off-road service parts were the development work of racers like Roger Penske.

To ensure your security, SSL 3.0 is not allowed on our site.

The basic short-block remained the same, but the 355 received a new set of AFR 195 Eliminator heads. And each cylinder had its own fuel injector fed by a fuel rail mounted above each bank. The engine was available in midsize A-Body and full-size B-Body passenger cars until the end of the 1976 model year. Used Chevy 350 Engine And Transmission For Sale It was disassembled, cleaned, and machined (0.030-overbore) to accept new forged rods, JE flat-top pistons (with adequate valve reliefs), and Total Seal rings.

The harmonic damper also does not interchange; it is a unique damper/pulley assembly. Monday through Friday. The Vortec 5700 produces 255hp (190kW) to 350hp (261kW) at 4600 rpm and 330lb·ft (447N·m) to 350lb·ft (475N·m) of torque at 2800 rpm. The chrome dress-up parts include the valve covers (with push-in breathers and “T-bar”-style hold-downs), timing cover, and air cleaner.

A 'divorced' exhaust crossover port heated well-choke thermostat coil was used to provide cleaner and faster engine warm-up. Due to its smaller displacement, the L99 provided higher EPA fuel economy ratings than the 5.7L LT1. Learn More Tech Advice Tech Advice Best Tech Advice and Customer Support, before and after your purchase! Estimated Ship Date: Loading...

Though we were tempted to plop it right on the dyno and hope for the best, we decided that the tired little Mouse deserved a little TLC before subjecting it to In the Corvette, a 350ci version of this engine, the L98, was released...it would be two years before the L98 would be offered in the F-Body. Today Loading... $2,269.40 Instructions Large Image Video Free Shipping Order this item and get free shipping and handling on this item! E-Street™ Series engines offer high-quality performance at an affordable price.

Valid on orders shipped in the contiguous United States.